|
|
|
| Solderability Test Equipment Type LPG |
| |
 |
The equipment is used for investigating the solderability of metals in accordance
with DIN 32 506, DIN 40 046 and DIN IEC 68 and, by using the ZEB accessory, can
also be used for the UN-L balling test. |
It has an elevating mechanism which
enables the test pieces to be dipped and withdrawn at speeds from 0 to 25 mm/sec.
The stationary solder bath with an internal diameter of 36 mm and inside depth
of 68 mm, having a solder content of 500 cm3, is fixed and rigidly connected to
the housing of the measuring and control equipment. If desired, the equipment
can also be supplied as a special with a plug in solder bath. The dipping speed
and immersion time in a solder bath can be regulated by a potentiometer, as can
the temperature, within a range of 0 to 450°C.
|
|
|
