Standards
Standards - DIN - DIN EN - DIN ISO | |
DIN | |
13973-1 | Instructions for testing abrasion resistance |
22130 | Fire resistant conveyor belts |
30643 | Testing erasure and abrasion resistance of labels and signs |
32506 | Testing solderability |
40048 | Testing solderability |
51834-1 | Testing lubricants |
51834-2 | Testing lubricants |
51834-3 | Testing lubricants |
5510-2 | Preventive fire protection in rail vehicles |
53119-1 | Testing paper |
53119-2 | Testing paper |
53926 | Determining the combustion characteristics of textiles in vertically fixed specimen |
54336 | Combustion characteristics of textiles under edge flaming |
DIN EN | |
531 | Protective clothing for industry workers exposed to heat |
660-1 | Determining wear characteristics |
660-2 | Determining wear characteristics |
12770 | Testing procedures for outsoles |
13823 | Testing combustion characteristics of construction products |
26940 | Textiles, determining flammability of vertically fixed specimen |
26941 | Textiles, measuring flame propagation of vertically fixed specimen vertikal angeordneter Proben |
32952 Part 1 | Textiles, combustion characteristics of bed clothes |
32952 Part 2 | Textiles, combustion characteristics of bed clothes |
60068-2-32 | Environmental assessments – soldering wetting balance |
60695-2-1/0 | Test procedures for evaluating fire hazard - tests with glow wire |
60695-2-1/1 | Test procedures for evaluating fire hazard - tests with glow wire on the final product |
60695-2-1/2 | Test procedures for evaluating fire hazard - testing flammability with glow wire |
DIN ISO | |
7148-1 | Testing tribological characteristics of plain bearing materials |
7148-2 | Testing tribological characteristics of plain bearing materials, testing babbitt material |
12756 | Ball point pens and rollerballs |
12757-1 | Ball point pens and ball point refill |
12757-2 | Ball point pens and ball point refill |
14145-1 | Rollerballs and rollerball refill |
14145-2 | Rollerballs and rollerball refill |
Normen - DIN IEC - DIN VDE - EC Directive - ISO | |
DIN IEC | |
68 | Testing solderability |
68 2-20 | Environmental testing soldering, Test T, spinning submersible tester - solderability (complies with: DIN EN 60068-2-20) |
695 Part 2-1 | Testing with glow wire |
DIN VDE | |
0471 Part 2-1 | Testing with glow wire |
0472 Part B | Combustion characteristics of cables and insulated conductors |
EC Directive | |
95/28/EC | Combustion characteristics of interior fittings of vehicles |
ISO | |
3582 | Horizontal fire testing of synthetic materials and rubber |
8295 | Plastic - Film and sheeting - Determination of the coefficients of friction |